kube-proxy Configuration (v1alpha1)

Resource Types

KubeProxyConfiguration

KubeProxyConfiguration contains everything necessary to configure the Kubernetes proxy server.

FieldDescription
apiVersion
string
kubeproxy.config.k8s.io/v1alpha1
kind
string
KubeProxyConfiguration
featureGates [Required]
map[string]bool

featureGates is a map of feature names to bools that enable or disable alpha/experimental features.

bindAddress [Required]
string

bindAddress is the IP address for the proxy server to serve on (set to 0.0.0.0 for all interfaces)

healthzBindAddress [Required]
string

healthzBindAddress is the IP address and port for the health check server to serve on, defaulting to 0.0.0.0:10256

metricsBindAddress [Required]
string

metricsBindAddress is the IP address and port for the metrics server to serve on, defaulting to 127.0.0.1:10249 (set to 0.0.0.0 for all interfaces)

bindAddressHardFail [Required]
bool

bindAddressHardFail, if true, kube-proxy will treat failure to bind to a port as fatal and exit

enableProfiling [Required]
bool

enableProfiling enables profiling via web interface on /debug/pprof handler. Profiling handlers will be handled by metrics server.

clusterCIDR [Required]
string

clusterCIDR is the CIDR range of the pods in the cluster. It is used to bridge traffic coming from outside of the cluster. If not provided, no off-cluster bridging will be performed.

hostnameOverride [Required]
string

hostnameOverride, if non-empty, will be used as the identity instead of the actual hostname.

clientConnection [Required]
ClientConnectionConfiguration

clientConnection specifies the kubeconfig file and client connection settings for the proxy server to use when communicating with the apiserver.

iptables [Required]
KubeProxyIPTablesConfiguration

iptables contains iptables-related configuration options.

ipvs [Required]
KubeProxyIPVSConfiguration

ipvs contains ipvs-related configuration options.

oomScoreAdj [Required]
int32

oomScoreAdj is the oom-score-adj value for kube-proxy process. Values must be within the range [-1000, 1000]

mode [Required]
ProxyMode

mode specifies which proxy mode to use.

portRange [Required]
string

portRange is the range of host ports (beginPort-endPort, inclusive) that may be consumed in order to proxy service traffic. If unspecified (0-0) then ports will be randomly chosen.

udpIdleTimeout [Required]
meta/v1.Duration

udpIdleTimeout is how long an idle UDP connection will be kept open (e.g. '250ms', '2s'). Must be greater than 0. Only applicable for proxyMode=userspace.

conntrack [Required]
KubeProxyConntrackConfiguration

conntrack contains conntrack-related configuration options.

configSyncPeriod [Required]
meta/v1.Duration

configSyncPeriod is how often configuration from the apiserver is refreshed. Must be greater than 0.

nodePortAddresses [Required]
[]string

nodePortAddresses is the --nodeport-addresses value for kube-proxy process. Values must be valid IP blocks. These values are as a parameter to select the interfaces where nodeport works. In case someone would like to expose a service on localhost for local visit and some other interfaces for particular purpose, a list of IP blocks would do that. If set it to "127.0.0.0/8", kube-proxy will only select the loopback interface for NodePort. If set it to a non-zero IP block, kube-proxy will filter that down to just the IPs that applied to the node. An empty string slice is meant to select all network interfaces.

winkernel [Required]
KubeProxyWinkernelConfiguration

winkernel contains winkernel-related configuration options.

showHiddenMetricsForVersion [Required]
string

ShowHiddenMetricsForVersion is the version for which you want to show hidden metrics.

detectLocalMode [Required]
LocalMode

DetectLocalMode determines mode to use for detecting local traffic, defaults to LocalModeClusterCIDR

detectLocal [Required]
DetectLocalConfiguration

DetectLocal contains optional configuration settings related to DetectLocalMode.

DetectLocalConfiguration

Appears in:

DetectLocalConfiguration contains optional settings related to DetectLocalMode option

FieldDescription
bridgeInterface [Required]
string

BridgeInterface is a string argument which represents a single bridge interface name. Kube-proxy considers traffic as local if originating from this given bridge. This argument should be set if DetectLocalMode is set to LocalModeBridgeInterface.

interfaceNamePrefix [Required]
string

InterfaceNamePrefix is a string argument which represents a single interface prefix name. Kube-proxy considers traffic as local if originating from one or more interfaces which match the given prefix. This argument should be set if DetectLocalMode is set to LocalModeInterfaceNamePrefix.

KubeProxyConntrackConfiguration

Appears in:

KubeProxyConntrackConfiguration contains conntrack settings for the Kubernetes proxy server.

FieldDescription
maxPerCore [Required]
int32

maxPerCore is the maximum number of NAT connections to track per CPU core (0 to leave the limit as-is and ignore min).

min [Required]
int32

min is the minimum value of connect-tracking records to allocate, regardless of conntrackMaxPerCore (set maxPerCore=0 to leave the limit as-is).

tcpEstablishedTimeout [Required]
meta/v1.Duration

tcpEstablishedTimeout is how long an idle TCP connection will be kept open (e.g. '2s'). Must be greater than 0 to set.

tcpCloseWaitTimeout [Required]
meta/v1.Duration

tcpCloseWaitTimeout is how long an idle conntrack entry in CLOSE_WAIT state will remain in the conntrack table. (e.g. '60s'). Must be greater than 0 to set.

KubeProxyIPTablesConfiguration

Appears in:

KubeProxyIPTablesConfiguration contains iptables-related configuration details for the Kubernetes proxy server.

FieldDescription
masqueradeBit [Required]
int32

masqueradeBit is the bit of the iptables fwmark space to use for SNAT if using the pure iptables proxy mode. Values must be within the range [0, 31].

masqueradeAll [Required]
bool

masqueradeAll tells kube-proxy to SNAT everything if using the pure iptables proxy mode.

syncPeriod [Required]
meta/v1.Duration

syncPeriod is the period that iptables rules are refreshed (e.g. '5s', '1m', '2h22m'). Must be greater than 0.

minSyncPeriod [Required]
meta/v1.Duration

minSyncPeriod is the minimum period that iptables rules are refreshed (e.g. '5s', '1m', '2h22m').

KubeProxyIPVSConfiguration

Appears in:

KubeProxyIPVSConfiguration contains ipvs-related configuration details for the Kubernetes proxy server.

FieldDescription
syncPeriod [Required]
meta/v1.Duration

syncPeriod is the period that ipvs rules are refreshed (e.g. '5s', '1m', '2h22m'). Must be greater than 0.

minSyncPeriod [Required]
meta/v1.Duration

minSyncPeriod is the minimum period that ipvs rules are refreshed (e.g. '5s', '1m', '2h22m').

scheduler [Required]
string

ipvs scheduler

excludeCIDRs [Required]
[]string

excludeCIDRs is a list of CIDR's which the ipvs proxier should not touch when cleaning up ipvs services.

strictARP [Required]
bool

strict ARP configure arp_ignore and arp_announce to avoid answering ARP queries from kube-ipvs0 interface

tcpTimeout [Required]
meta/v1.Duration

tcpTimeout is the timeout value used for idle IPVS TCP sessions. The default value is 0, which preserves the current timeout value on the system.

tcpFinTimeout [Required]
meta/v1.Duration

tcpFinTimeout is the timeout value used for IPVS TCP sessions after receiving a FIN. The default value is 0, which preserves the current timeout value on the system.

udpTimeout [Required]
meta/v1.Duration

udpTimeout is the timeout value used for IPVS UDP packets. The default value is 0, which preserves the current timeout value on the system.

KubeProxyWinkernelConfiguration

Appears in:

KubeProxyWinkernelConfiguration contains Windows/HNS settings for the Kubernetes proxy server.

FieldDescription
networkName [Required]
string

networkName is the name of the network kube-proxy will use to create endpoints and policies

sourceVip [Required]
string

sourceVip is the IP address of the source VIP endoint used for NAT when loadbalancing

enableDSR [Required]
bool

enableDSR tells kube-proxy whether HNS policies should be created with DSR

rootHnsEndpointName [Required]
string

RootHnsEndpointName is the name of hnsendpoint that is attached to l2bridge for root network namespace

forwardHealthCheckVip [Required]
bool

ForwardHealthCheckVip forwards service VIP for health check port on Windows

LocalMode

(Alias of string)

Appears in:

LocalMode represents modes to detect local traffic from the node

ProxyMode

(Alias of string)

Appears in:

ProxyMode represents modes used by the Kubernetes proxy server.

Currently, three modes of proxy are available in Linux platform: 'userspace' (older, going to be EOL), 'iptables' (newer, faster), 'ipvs'(newest, better in performance and scalability).

Two modes of proxy are available in Windows platform: 'userspace'(older, stable) and 'kernelspace' (newer, faster).

In Linux platform, if proxy mode is blank, use the best-available proxy (currently iptables, but may change in the future). If the iptables proxy is selected, regardless of how, but the system's kernel or iptables versions are insufficient, this always falls back to the userspace proxy. IPVS mode will be enabled when proxy mode is set to 'ipvs', and the fall back path is firstly iptables and then userspace.

In Windows platform, if proxy mode is blank, use the best-available proxy (currently userspace, but may change in the future). If winkernel proxy is selected, regardless of how, but the Windows kernel can't support this mode of proxy, this always falls back to the userspace proxy.

ClientConnectionConfiguration

Appears in:

ClientConnectionConfiguration contains details for constructing a client.

FieldDescription
kubeconfig [Required]
string

kubeconfig is the path to a KubeConfig file.

acceptContentTypes [Required]
string

acceptContentTypes defines the Accept header sent by clients when connecting to a server, overriding the default value of 'application/json'. This field will control all connections to the server used by a particular client.

contentType [Required]
string

contentType is the content type used when sending data to the server from this client.

qps [Required]
float32

qps controls the number of queries per second allowed for this connection.

burst [Required]
int32

burst allows extra queries to accumulate when a client is exceeding its rate.

DebuggingConfiguration

Appears in:

DebuggingConfiguration holds configuration for Debugging related features.

FieldDescription
enableProfiling [Required]
bool

enableProfiling enables profiling via web interface host:port/debug/pprof/

enableContentionProfiling [Required]
bool

enableContentionProfiling enables lock contention profiling, if enableProfiling is true.

FormatOptions

Appears in:

FormatOptions contains options for the different logging formats.

FieldDescription
json [Required]
JSONOptions

[Experimental] JSON contains options for logging format "json".

JSONOptions

Appears in:

JSONOptions contains options for logging format "json".

FieldDescription
splitStream [Required]
bool

[Experimental] SplitStream redirects error messages to stderr while info messages go to stdout, with buffering. The default is to write both to stdout, without buffering.

infoBufferSize [Required]
k8s.io/apimachinery/pkg/api/resource.QuantityValue

[Experimental] InfoBufferSize sets the size of the info stream when using split streams. The default is zero, which disables buffering.

LeaderElectionConfiguration

Appears in:

LeaderElectionConfiguration defines the configuration of leader election clients for components that can run with leader election enabled.

FieldDescription
leaderElect [Required]
bool

leaderElect enables a leader election client to gain leadership before executing the main loop. Enable this when running replicated components for high availability.

leaseDuration [Required]
meta/v1.Duration

leaseDuration is the duration that non-leader candidates will wait after observing a leadership renewal until attempting to acquire leadership of a led but unrenewed leader slot. This is effectively the maximum duration that a leader can be stopped before it is replaced by another candidate. This is only applicable if leader election is enabled.

renewDeadline [Required]
meta/v1.Duration

renewDeadline is the interval between attempts by the acting master to renew a leadership slot before it stops leading. This must be less than or equal to the lease duration. This is only applicable if leader election is enabled.

retryPeriod [Required]
meta/v1.Duration

retryPeriod is the duration the clients should wait between attempting acquisition and renewal of a leadership. This is only applicable if leader election is enabled.

resourceLock [Required]
string

resourceLock indicates the resource object type that will be used to lock during leader election cycles.

resourceName [Required]
string

resourceName indicates the name of resource object that will be used to lock during leader election cycles.

resourceNamespace [Required]
string

resourceName indicates the namespace of resource object that will be used to lock during leader election cycles.

LoggingConfiguration

Appears in:

LoggingConfiguration contains logging options Refer Logs Options for more information.

FieldDescription
format [Required]
string

Format Flag specifies the structure of log messages. default value of format is text

flushFrequency [Required]
time.Duration

Maximum number of nanoseconds (i.e. 1s = 1000000000) between log flushes. Ignored if the selected logging backend writes log messages without buffering.

verbosity [Required]
uint32

Verbosity is the threshold that determines which log messages are logged. Default is zero which logs only the most important messages. Higher values enable additional messages. Error messages are always logged.

vmodule [Required]
VModuleConfiguration

VModule overrides the verbosity threshold for individual files. Only supported for "text" log format.

options [Required]
FormatOptions

[Experimental] Options holds additional parameters that are specific to the different logging formats. Only the options for the selected format get used, but all of them get validated.

VModuleConfiguration

(Alias of []k8s.io/component-base/config/v1alpha1.VModuleItem)

Appears in:

VModuleConfiguration is a collection of individual file names or patterns and the corresponding verbosity threshold.

Last modified May 04, 2022 at 10:32 PM PST: Config API reference for 1.24 (a5eeb338f1)